1. Before the operation, check the motion components. Whether the bearing, conveyor belt, and triangular belt should be damaged.
2. Lubrication and maintenance. Every 100 hours of work in the hot air fan, 400 hours of the cold fan with lubricating oil for 400 hours. Each operator of the motor is 1,000 hours, and the maintenance is replaced with butter. The racket and the conveyor bearing is maintained and lubricated oil.
3. Repair and damaged components: bearings, bearing seats, enhanced buckets, and enhanced bucket screws to loosen. The conveyor bearings and tape connection buckles should be checked and replaced often. Electric and sports components should be maintained often. Pay attention to safety at the top of the tower.
4. Seasonal replacement and maintenance, the dryer must be maintained in each season, the dryer should clean up the inner air ducts, the improvement machine should be loosened, the wind turbine should be cleaned up. Pack the sedimentation pool to accumulate ash, and clean up the pipeline. The speed regulating motor speed regulating table returns to zero standby.
5. If the dryer operates outdoors, it is necessary to use corresponding rain protection and snow maintenance measures. The whole machine needs to perform large -scale maintenance and maintenance once a year, and the need for painting is required every two years.
